Home
Back to category
SZD-55 Nexus
ASW-28 2m
FOX 2.2m
Jantar 2.4m
Discus 2b 2.5m
Ventus 2c 2.5m
Duo Discus 2.5m
DG-1000S 2.5m
Habicht 2.6m
H-301 Libelle
ASW-28 2.5m
DG-1000 2.6m
DG-600 2.6-3.2m
Lunak LF-107 2.6m
Nimbus 4 2.6m
Salto H101 2.5m
Blanik L23 2.7m
ASW-22 BL 2.8m
Grob 103C Twin III
L213 A (2.7m)
ASW-28-18 3m
Swift S-1
Ventus 2c 3m
Duo Discus 3.1m
ASW-28 3m
ASH-26 3m
Pilatus B4 3m
ASK-23 3m
SZD-55 3m
DG-600 3.0-3.6m
ASK-13 3.2m
HpH 304 CZ 3.1m
DG-1000 3.2-3.7m SC
DG-303 3.3m
Nimbus 4D 3.3m
Go3 Minimoa
Minimoa Mo 2a
DFS-Kranich 3.6m
DG-800S/M 3.5-4.2m
Ventus 2ax 3.5m
ASW-28 3.5m
DG-505 3.6m
DG-1000 3.7m
DG-1000 3.7m FG
L33-Solo 3.5m
Swift S-1 3.7m
 

FOX 2.2m

Specifications:

 
Wing Span: 2.2 m (86")
Length: 1.145 m (45")
Wing Area: 39.6 dm2 (613 sq. in.)
Wing Airfoil: RG15
Wing Loading: 38 g/dm2 (12 oz/sq. ft.)
Flying Weight: 1.5 kg (52 oz)
Radio: Standard radio
Mini servos for the wings
 
After the success of the Swift, the designer had to make a two seater, which will be the first aerobatic two seater for training and teaching. This model is a semi-scale reproduction of this famous polish aerobatic sailplane. This small sloper features the RG15 airfoil which gives him a smooth fast and versatile flying characteristic. It is fully aerobatic, has a wide speed range, races well. Perfect on the slope or behind a small tow plane. It can also be winched or hi-started.

Two micro servos will have to be fitted in the wings, two standard sized servos will be used for the elevator and rudder which are respectively actuated via a pushrod and a cable pushrod. Even a tow release might be fitted in the nose for aero towing.

This RTF kit is coming with a high quality white epoxy Fiberglas fuselage, and has the wing joiner carrying tube installed. The sheeted and Fiberglas reinforced foam wings are covered, no additional work is required on the wings, except installing the wing servo. The elevator is finished and covered, the rudder is hollow moulded. A clear plastic canopy and a Fiberglas canopy tray is supplied and has to be assembled. Only a few hours are required to finish this glider. Detailed instructions and a hardware package are completing the kit.

Content:

- Epoxy glass fuselage with a white epoxy gelcoat.
- Wings covered with Oracover.
- Clear canopy.
- Cockpit.
- Wings 2 pieces with wing joiners, foam tail unit with obechi wood covering.
- Hardware, instructions, stickers.

mdm FOX 2.2 m ARF kit, price: N/A

 
 
 

Copyright 1997-2014 ICARE enr. All rights reserved.