Back to category
SZD-55 Nexus
ASW-28 2m
FOX 2.2m
Jantar 2.4m
Discus 2b 2.5m
Ventus 2c 2.5m
Duo Discus 2.5m
DG-1000S 2.5m
Habicht 2.6m
H-301 Libelle
ASW-28 2.5m
DG-1000 2.6m
DG-600 2.6-3.2m
Lunak LF-107 2.6m
Nimbus 4 2.6m
Salto H101 2.5m
Blanik L23 2.7m
ASW-22 BL 2.8m
Grob 103C Twin III
L213 A (2.7m)
ASW-28-18 3m
Swift S-1
Ventus 2c 3m
Duo Discus 3.1m
ASW-28 3m
ASH-26 3m
Pilatus B4 3m
ASK-23 3m
SZD-55 3m
DG-600 3.0-3.6m
ASK-13 3.2m
HpH 304 CZ 3.1m
DG-1000 3.2-3.7m SC
DG-303 3.3m
Nimbus 4D 3.3m
Go3 Minimoa
Minimoa Mo 2a
DFS-Kranich 3.6m
DG-800S/M 3.5-4.2m
Ventus 2ax 3.5m
ASW-28 3.5m
DG-505 3.6m
DG-1000 3.7m
DG-1000 3.7m FG
L33-Solo 3.5m
Swift S-1 3.7m

ASW-28 2m


Scale: 1:7
Wing Span: 2 m (82")
Wing Area: 17 dm2 (269 sq. in.)
Wing Airfoil: S 3010
Wing Loading: 32 g/dm2 (10.7 oz/sq. ft.)
Flying Weight: 0.6 kg (20 oz)
Radio: Standard radio
Sub-Micro servos


The ASW-28 is a nice semi-scale reproduction of the T-tail glider produced by the German company A. Schleicher, Flugzeugbau, currently in production. It is the constant evolution of the ASW series and is the new standard class glider. Improvements are triple taper leading edge and high aspect ratio winglets. This model is best suited for slope flying, but will do well on a good thermal day. Due to its high aspect ratio, the ASW-28 will cover a lot of ground, but due to it's low wing loading, it has very smooth handling. Building and flying require some skill, thus the designation for intermediate pilot.

The ASW-27 has a slightly different wing-planform with shorter winglets. Fuselage is the same.

The kit comes completely finished. The wings are hollow core moulded and the ailerons are cut-out. The winglets are moulded onto the wing. The clear plastic canopy is fitted to the Fiberglas tray, wing joiner system is installed in the fuselage. All what's required is your radio gear. You will need 4 sub-micro servos and a small 4 channel receiver.

ASW-28  (2 m) FG RTF kit, price: N/A


Copyright 1997-2014 ICARE enr. All rights reserved.