Used / Pre-owned

Online Order Form

New Classified section, we wanted to give the opportunity here to sellers and buyers, to meet. Mostly intended for sellers that offer their large scale gliders to sell. We will not limit this section to large scale gliders, but will decide what is appropriate for this classified section. Basically all what could be scale glider related, may be posted. Large scale gliders will remain the priority goal of this section, but you may post tugs and other scale glider related accessories if pertinent. We hope that this section will be helpful to everyone. Of course the advertisement are the sole responsibility of the seller, and ICARE can not endorse or can not be responsible for any misleading information or sales that were not completed. To avoid any spam catching any listed e-mail, we will put you in contact with the owner, e-mail us at the address on the upper left hand and we will forward the inquiry.

Description Price US $  
1:2.75 Swift 4.66-5.5m, all moulded, Rx ready. Only a season of flights. Hitec Titanium servos throughout the plane. Ask for more pictures. May be a nice turbine powered project!



Hutter 17  (~1942)

1/3 scale Hutter 17, 3.2m span, scratch built from Cliff Charlesworth plans. Covered with Antique Solartex fabric. JR and Hitec Servos. New JRPR 2000 10CH Dual Conversion Scanselect receiver.
This glider was built with an Eppler 205 airfoil. The Wing mounting system was changed from sheet metal bracket to a tube and steel rod with monoblock system. Cliff mentioned in his book "scale model gliders" that the Goettingen 535 airfoil was not a good airfoil for this glider. This glider was flown four times at the 2009 JR Aerotow and it flies very well. It is in new condition. I will deliver free in a 100 mile radius from Dewitt, MI.



Description Price US $  

Treat yourself to one of the nicest flying planes on the planet, as well as one of the nicest looking models on the planet.
For sale is the deal of the season.  LET Minimoa.  Flown maybe a dozen times. PERFECT CONDITION. Beautiful Red and white scheme with the Swiss flag on the tail. Always a head turner whenever taken out. Showroom quality only LET can produce. The plane will come ready to fly, simply install your receiver and battery and your off to the thermals. The plane will come with Special custom made, very thick, padded covers for the wings and stab. Detailed cockpit and high quality servos and wiring. Shipped to anywhere in the Cont USA. There is well over $4600 into this model. Treat yourself to a gem you will be flying for years to come.



Factory Spec's:
Scale 1:3,5, Span 4,8 m
Length 2,0 m, Airfoil HQ 3,0
Weight 8,5 kg, Wing area 1,7 m2

Copyright 1997-2016 ICARE enr. All rights reserved.